Introduction
Hydraulic cylinder performance depends on the accuracy and condition of the components working together inside the cylinder. A hydraulic honed tube provides the tube body in which the piston and sealing system operate, making dimensional requirements and internal surface quality important considerations for hydraulic equipment manufacturers and industrial buyers.
This guide explains hydraulic honed tubes in practical terms, including their specifications, materials, applications and selection factors. It also presents the listed specifications of the Mild Steel Honed Tube shown in the Vraj Hydraulics product range, so buyers can compare their requirement against actual product parameters.
What Are Hydraulic Honed Tubes?
A hydraulic honed tube is a precision-finished tube intended for hydraulic cylinder applications. The inner surface is processed to provide a suitable working surface for the piston and seals, while the tube dimensions are selected according to the cylinder design and operating requirement.
In industrial purchasing, the most important information is usually the inner diameter, wall thickness, material grade, tube length and application. These parameters help determine whether a particular honed tube is suitable for the planned hydraulic cylinder or machine.
The Vraj Hydraulics Mild Steel Honed Tube specification shown for this article lists a 50 mm inner diameter, 5 mm wall thickness and ST52 material grade.
Hydraulic Honed Tube Technical Specifications
Product specifications should always be checked against the actual application before ordering. The following table uses the listed technical details of the Mild Steel Honed Tube provided for this article.
| Parameter | Listed Vraj Hydraulics Specification |
|---|---|
| Inner Diameter | 50 mm |
| Wall Thickness | 5 mm |
| Material Grade | ST52 |
| Tube Length | Cut Length |
| Application | Machine Tool, Hydraulic Cylinder, Press, Pneumatic |
| Size | 1/4 inch - 1 inch |
| Unit Length | 6 m |
| Hollow Section | Circular |
Materials & Construction
Material selection is one of the first checks when sourcing a honed tube. The material needs to match the mechanical and operating requirements of the hydraulic cylinder, while the tube dimensions need to match the cylinder design.
For the Vraj Hydraulics product referenced in this article, the listed material grade is ST52. Buyers should confirm the required material grade, inner diameter, wall thickness and quantity with the supplier before placing an order.
The listed Mild Steel Honed Tube specification uses ST52.
The listed inner diameter is 50 mm.
The listed wall thickness is 5 mm.
The listed hollow section is circular.
Honing & Manufacturing Process
Honed tubes are prepared to provide a controlled internal surface suitable for hydraulic cylinder assembly. In practical terms, the tube manufacturing and finishing sequence is focused on producing the required internal geometry and surface condition while maintaining the dimensional requirements specified by the buyer.
Select the required tube material and grade according to the cylinder application.
Prepare the tube according to the required inner diameter, wall thickness and length.
Process the internal surface to achieve the required working condition for the hydraulic cylinder.
Check the specified product parameters and prepare the required cut length and packaging for dispatch.
Hydraulic Honed Tube Applications
Honed tubes are commonly selected for equipment where a precision internal tube surface is required as part of a hydraulic cylinder or related system. The Vraj Hydraulics specification supplied for this article specifically lists machine tools, hydraulic cylinders, presses and pneumatic applications.
Used as the cylinder tube in hydraulic cylinder assemblies where the specified inner diameter and wall thickness are required.
Suitable for machine-tool applications where hydraulic or pneumatic movement systems require precision tube components.
Used in press equipment where hydraulic cylinder components need to meet defined dimensional requirements.
The listed Vraj specification includes pneumatic applications, subject to the final application requirements.
Key Benefits of Choosing the Right Honed Tube
- Application Matching: Selecting the correct inner diameter and wall thickness helps match the tube to the cylinder design.
- Defined Material: The listed Vraj product uses ST52 material grade for the referenced Mild Steel Honed Tube.
- Specified Tube Length: The listed product supports cut-length requirements.
- Multiple Industrial Uses: The listed applications include machine tools, hydraulic cylinders, presses and pneumatic systems.
- Clear Purchasing Parameters: Buyers can specify diameter, wall thickness, grade, length, application and quantity when requesting a quotation.
How to Select the Right Hydraulic Honed Tube
Choosing a hydraulic honed tube should start with the cylinder design and application. Before requesting a quotation, prepare the dimensions and operating information that the supplier needs to confirm product suitability.
- Inner Diameter: Confirm the required internal diameter. The referenced Vraj product lists 50 mm.
- Wall Thickness: Confirm the required wall thickness. The referenced product lists 5 mm.
- Material Grade: Confirm whether ST52 or another specified grade is required.
- Tube Length: Specify required cut length or unit-length requirements. The referenced product lists cut length and 6 m unit length.
- Application: State whether the tube is intended for a hydraulic cylinder, machine tool, press or pneumatic application.
- Quantity: Provide the required quantity so supply and dispatch can be planned accurately.
Why Choose Vraj Hydraulics for Honed Tubes?
Vraj Hydraulics supplies hydraulic product solutions for industrial buyers and OEM requirements. For the Mild Steel Honed Tube referenced in this article, the listed specification includes a 50 mm inner diameter, 5 mm wall thickness, ST52 material grade, circular hollow section, cut-length tube length and 6 m unit length.
If your requirement differs from these listed parameters, share the required dimensions, material grade, application, quantity and delivery location with the Vraj Hydraulics team for product confirmation.
Frequently Asked Questions
What is a hydraulic honed tube?
A hydraulic honed tube is a precision-finished tube used in hydraulic cylinder applications where a consistent internal surface is required for reliable piston and seal movement.
What are the listed specifications of the Vraj Hydraulics Mild Steel Honed Tube?
The listed product specification shows a 50 mm inner diameter, 5 mm wall thickness, ST52 material grade, cut-length tube length, circular hollow section, 6 m unit length, and applications including machine tools, hydraulic cylinders, presses and pneumatic systems.
What material grade is listed for the Mild Steel Honed Tube?
The attached product specification lists ST52 as the material grade for the Mild Steel Honed Tube.
Can honed tubes be supplied according to application requirements?
For a specific requirement, buyers should confirm the required inner diameter, wall thickness, material grade, tube length, quantity and application with Vraj Hydraulics before ordering.
Conclusion
Selecting the right hydraulic honed tube requires more than choosing a tube by name. Inner diameter, wall thickness, material grade, length, application and quantity should all be checked against the hydraulic cylinder or equipment requirement.
The Mild Steel Honed Tube specification referenced in this guide lists 50 mm inner diameter, 5 mm wall thickness, ST52 material grade, cut length, 6 m unit length and circular hollow section, with machine tools, hydraulic cylinders, presses and pneumatic systems listed as applications. For a project-specific requirement, contact Vraj Hydraulics with your exact specifications.
Discuss your honed tube specifications with our team.
Share inner diameter, wall thickness, material grade, quantity and delivery location for a product requirement review.